| CG-503 交流接地阻抗測試器 (停產) |
| Specifications: |
| 測量阻抗範圍 | 0 ~ 0.1Ω / 0~0.5Ω | |
| 測量準確度 | 3A ~ 5A±10% of full scale; 5A ~ 30A±5% of full scale | |
| 測試電流輸出 | AC3 ~ 30A | |
| 測試電壓 | Max output Voltage 8V AC Typically | |
| 阻抗表頭 | Indicate the testing Resistance and setting value of FALL and OFFSET. | |
| 電流表頭 | Indicate the testing Current and setting value of warring | |
| 開關 | Zero-Cross Solid-Sate | |
| 導通測試 | 1.A Warning alarm is sounded when the
test current value shifts by More than roughly ±10% 2.The prescribed value can be set to any range of 3 ~ 30A. |
|
| 補償功能 | 1.Offset range :UP to 0.1 2.Offset error : Max±5% of full scale |
|
| 上限 | 1.Measuring range can be set between
5~100% 2.±15% of full scale with respect to reference value(3 ~ 5A) 3.±10% of full scale with respect to reference value(5 ~ 30A) |
|
| 計時器 | 1S,10S,1Min,10Min,4range. | |
| 外部控制單元 | PIN5/PIN2 short stop controlling PIN4/PIN2 short start controlling PIN1 out:+24V 20mA,PIN2 GND,PIN3NC |
|
| 測試模式 | 一般 | If the warning acted then the test will stop. |
| 持續 | If the warning acted then the test will be continuously | |
| 蜂鳴器警告聲 | A Buzzer is sounded when the test fail acted. | |
| 測試頻率 | 50Hz or 60Hz independent by line voltage. | |
| 輸出訊號 | TEST, PASS, FAIL, WARNING, READY, MONITOR | |
| 輸入電源 | 115V/230V ± 10% 1Ø 50/60Hz. | |
| 標準配件 | Instruction manual x1, Test Lead CG503-1x1,Power cordx1 | |
| 尺寸 | 430x145x415 (mm) (WxHxD) | |
| 重量 | Approx:18.5kg | |
| ● 因本公司不斷追求產品改良，故規格若有變更，恕不另行通知，網頁內容僅供參考，實際規格依出貨時規格書為準。 |
| ● 擎宏電子保留逕行更動規格及其他產品資訊之權利，並擁有對規格之最終解釋權力，且不承擔內容之錯誤或疏失。 |
| ● 以上規格表內所列機箱大小為參考值，實際尺寸依需求另行議定 。 |
| ● 接受特殊規格訂製。 |
|
|
|||
|
|
|||
|
Copyright 2008 CHYNG HONG ELECTRONIC CO., LTD. | Contact us |
|||