1.bus connection method
2.star connection method
| GPIB connection interface introduction |
|
The GPIB (general purpose interface bus) was specifically designed to connect computers, peripherals and laboratory instruments so that data and control information could pass between them. | |
|
Specified transfer rate: 1 MByte per second | |
|
Cable length: 20m between controller and one device or 2m between each device, whichever is less. | |
|
The GPIB allows up to 15 intelligent devices to share a single bus. At any time there must be one device on the bus which is the controller. | |
|
|
Two-connection method : |
1.bus connection method
|
|
2.star connection method
|
||
|
|||
| |
|||
| Copyright 2019 CHYNG HONG ELECTRONIC CO., LTD. | Contact us |
|||