IDRC功率表附件及治具

CPA-系列外觀前視圖：

● CPA 系列外觀前視圖

CPA-系列外觀後視圖：

● CPA-231 後視圖

● CPA-232 後視圖

● CPA-661 後視圖

● CPA-662 後視圖

● CPA-663 後視圖

● CPA-664 後視圖

● CPA-668 後視圖

控制介面及選購配件：

● CP-6CB三合一介面卡

● CPR-200

● C160

● E3N

● 8104

AC Current Clamp Adaptors Model 8104

Introduction
The Model 8104 is clamp-on AC current to
voltage transducersthat permit your digital
multimeters or recorders to measure
AC current up to 3000A.

Features
The model is available for different application
needs,depending on a current to be measured
and the size of a current carrying conductor.

Specifications (at -13℃to +33℃, 85% relative humidity maximum 45Hz to 65Hz frequency)

Measuring Ranges	0 - 30/150/300/1500/3000A AC
Rated Output	0 - 150mV AC for all ranges
Accuracy	±2% of rated output for 0 – 300A±4% of rated output for 1500 –3000A
Operating Temperature & Humidity	-10℃ to +50℃, 85% relative humidity maximum
Measurement Time	Continuous for all range at an ambient temperature of+30℃ maximum
Output Cord	5m long, terminated with 4mm-dia banana plug
Output Polarity	When DC current flows from the upside to theUnderside of the clamp, the red banana plug is positive.
Dimensions	310(L) x 150(W) x 29(D) mm
Weight	950g approx.
Conductor Size	100 mm

Operation (For use with a clamp on AC current recorder refer to operating instructions supplied with it)

Preparation

With the output cord of the clamp adaptor connected to a digital miltimeter (AC voltmeter)
having a minimum input impedance of 100kΩ, set the clamp adaptor range switch to the
highest range and the digital multimeter range to 200mV AC or 2V AC.
Press the adaptor jaw trigger to open the transformer jaw and clamp on an AC current
carrying conductor. Take the multimeter reading in amperes directly or multiply it by a proper
factor. Where input is a smaller current, change the adaptor range switch position for lower
range.

Examples:
Adaptor Range	Output Voltage	DMM Reading	AC Current Measured	How to Interpret reading
6A	150mV	100mV or .0100V	4A	Multiply by 0.04 or 40.
15A	150mV	100mV or .0100V	10A	Multiply by 0.1 or 100.
30A	150mV	100mV or .0100V	20A	Multiply by 0.2 or 200.
60A	150mV	100mV or .0100V	40A	Multiply by 0.4 or 400.
150A	150mV	100mV or .0100V	100A	Read directlyOr multiply by 1000.
300A	150mV	100mV or .0100V	200A	Multiply by 2 or 2000.
1500A	150mV	100mV or .0100V	1000A	Multiply by 10 or 10000.
3000A	150mV	100mV or .0100V	2000A	Multiply by 20 or 20000.