KLP 系列  1U 可程式定電壓、定電流、定功率直流電源供應器
KLP 系列規格 :  

TO->

PAGE 2

HOME
Output Model
(note.3)		 MAXIMUM
CURRENT
FOR RATED
VOLTAGE 		MINIMUM
PROGRAMMABLE
CURRENT

MAXIMUM
VOLTAGE
FOR RATED
CURRENT

RIPPLE
AND NOISE
p-p
(note.2)		 EFFICIENCY
CV CC
V
(note.1)		 A
(note.1)
0 - 10
0 - 150
 KLP 10-150 120A@10V 1.9A 8V@150A 60 mV 80%
0 - 20
0 - 120
 KLP 20-120 60A@20V 1.5A 10V@120A 60 mV 82%
0 - 30
0 - 60
 KLP 36-60 33.3A@36V 0.8A 20V@60A 60 mV 83%
0 - 75
0 - 33
 KLP 75-33 16A@75V 0.4A 36V@33.3A 60 mV 84%
0 - 150
0 - 16
 KLP 150-16 8A@150V 2.8 75V@16A 125 mV 86%
0 - 300
0 - 8
 KLP 300-8 4A@300V 2.0 150V@8A 125 mV 87%
0 - 600
0 - 4
 KLP 600-4 2A@600V 1.4 300V@4A 125 mV 88%
● note.1: The maximum current and voltage are constrained by the 1200 watt power limitation, see Operating Region Figure.
● note.2: Bandwidth: 20MHz; low frequency ripple may be higher at loads less than 30 Watts.
● note.3: Standard models (no suffix) include built-in GPIB and RS 232 Interfaces.
                E-Series models (suffix E) include built-in GPIB and LAN Interfaces.
● note.4: The unit is shipped with a user-wirable mating connector for the IEC 320 style recessed power inlet connector. Optional line cords are available as accessories.
 
　
選購配備 訂購訊息：
編號 品名
E Option GPIB and LAN interface
R Option GPIB and RS-232 interface, plus RODC (Rapid Output Discharge)
118-0776 Line cord set, 2.5m long, with NEMA 5-20P termination (125V/20A). Supports rated load power over mains voltage range of 90-136V a-c.
118-1136 Line cord set, 2.5m long, with NEMA 5-15P termination (125V/15A). Supports restricted load power over mains voltage range of 90-136V a-c.
118-1137 Line cord set, 2.5m long, with NEMA 6-15P termination (250V/15A). Supports rated load power over mains voltage range of 180-265V a-c.
 

上一頁

下一頁
以上規格僅供參考，實際規格以KEPCO網站資料為準，或洽本公司業務人員

Copyright 2024 CHYNG HONG ELECTRONIC CO., LTD.  |  Contact us