IDRC DSP-WS Solar Array Simulator 3U 10kw 12kW 15kW 18kW(太阳能阵列模拟器)

DSP-WS 系列太阳能阵列模拟器(Solar Array Simulator)

规格表 :		TO->	10kW type	15kW type	HOME
			12kW type	18kW type

	12kW	12kW	18kW	18kW
	DSP1000-36WS	DSP1300-27WS	DSP1500-30WS	DSP1950-27WS
Output voltage
Rated value (V1)	0 ~ 1000V	0 ~ 1300V	0 ~ 1500V	0 ~ 1950V
Settable range	0 ~ 1050V	0 ~ 1365V	0 ~ 1575V	0 ~ 2047.5V
Overvoltage protection (OVP)	0% ~ 110% of rated output voltage
Voltage @Rated Current (V2)	333.33V	444.44V	500V	666.66V
Programming resolution	5 digits
Programming accuracy(*2)	+/- 0.1% of rated voltage
Meter resolution	5 digits
Meter accuracy(*2)	+/- 0.1% of rated voltage
Line regulation(*6)	+/- 0.02% of rated voltage
Load regulation(*7)	+/- 0.05% of rated voltage
Temperature coefficient for set values	100ppm/℃ of rated output voltage, after a 30 minutes warm-up
Ripple & noise (rms) (3)(4)	< 1725mVpp < 376mVrms	<2240mVpp < 490mVrms	< 2590mVpp < 430mVrms	< 3360mVpp < 645mVrms
Full load up	<30ms
Full load down	<80ms
No load down	<5s	<6s	<5s	<6s
Transient Response(*5)	< 1.5 ms
Remote compensation	5V
Output current
Rated value (A1)	0 ~ 36A	0 ~ 27A	0 ~ 36A	0 ~ 27A
Settable range	0 ~ 37.8A	0 ~ 28.35A	0 ~ 37.8A	0 ~ 28.35A
Over current protection (OCP)	0% ~ 110% of rated output current
Current @Rated Voltage (A2)	10A	9.23A	12A	9.23A
Programming resolution	5 digits
Programming accuracy(*2)	+/- 0.2% of rated current
Meter resolution	5 digits
Meter accuracy(*2)	+/- 0.2% of rated current
Line regulation(*6)	+/- 0.05% of rated current
Load regulation(*7)	+/- 0.15% of rated current
Temperature coefficient for set values	100ppm/℃ of rated output voltage, after a 30 minutes warm-up
Ripple & noise (rms)(3)(4)	24mA	24mA	42mA	42mA
Output power
Rated value	0 ~ 12kW	0 ~ 12kW	0 ~ 18kW	0 ~ 18kW
Settable range	0 ~ 12240W	0 ~ 12240W	0 ~ 18360W	0 ~ 18360W
Over power protection (OPP)	0% ~ 110% of rated output power
Programming resolution	5 digits
Programming accuracy(*2)	< 1% of rated output power
Meter resolution	5 digits
Meter accuracy(*2)	+/- 0.5% of rated output power
Line regulation(*6)	< 0.05% of rated output power
Load regulation(*7)	< 0.75% of rated output power
Internal resistance
Adjustment range	0 ~ 27.777Ω	0 ~ 48.148Ω	0 ~ 41.666Ω	0 ~ 72.222Ω
Programming resolution	0.001Ω	0.001Ω	0.001Ω	0.001Ω
Programming Accuracy (*2)	<=2.3% of max. resistance
Insulation
Primary - Chassis	2.5 kV DC
Primary - Secondary	2.5 kV DC
Secondary - Chassis	1500VDC	2000VDC	2000VDC	3000VDC
Operating environment	Indoor use
Operating temperature	0℃ ~ 50℃
Operating humidity	30%rh ~ 80%rh (no condensation) Max 80% RH up to 30℃, linear decrease to 50% RH at 40℃
Storage temperature	-20℃ ~ 70℃
Storage humidity	10%rh ~ 80%rh (no condensation)
Altitude	Up to 2000m
Cooling method	Forced air cooling using the speed controlled fan
Ground polarity	Capable of Negative ground or Positive ground
Input (output power down to 15kW for 180-264V input, related spec refer to 15kW models)
Nominal input rating	380V ~ 415V 50Hz/60Hz 3-phase 3 wires
Input voltage range	340VAC ~ 460VAC
Input frequency range	47Hz ~ 63Hz
Current (Maximum)	26A / Phase (Input 3-phase340V)		40A / Phase (Input 3-phase340V)
Inrush current(Maximum)	66A / Phase (Input 3-phase460V)		99A / Phase (Input 3-phase460V)
Input Power (Maximum)	14.4kVA		21.6 kVA
Efficiency	86 ~ 95% varies by model(*1)
Power Factor	0.95 typ.
Leak current	< 3.5 mA
Memory & Sequence
Number of memory	3 sets (operating in front panel)
Maximum step number	500 steps per each Sequence
Maximum Sequence number	16
Step time settable range	0.001 sec ~ 999999.999 sec
Standard Interface
LAN interfaces	1 x LXI 1.4 for communication,
J1 (Auxiliary control)	Function : Interlock , External output ON/OFF , Shut OFF , Alarm signal output, Output voltage downward signal
Optional Analog programming Interface
Status output (dry contact)	CV State, CC State , CP State , CR State , ON/OFF State
Voltage control	0% ~ 100% of rated output voltage in the range of 0V ~ 5V or 0V ~ 10V
Voltage control accuracy(*2)	+/-0.2%
Current control	0% ~ 100% of rated output current in the range of 0V ~ 5V or 0V ~ 10V
Current control accuracy(*2)	+/-0.2%
Power control	0% ~ 100% of rated output current in the range of 0V ~ 5V or 0V ~ 10V
Power control accuracy(*2)	+/-0.2%
Monitoring output	0 ~ 5V or 0 ~ 10V output for monitoring V/A/W
Monitoring accuracy (*2)	+/-0.2%
Reference output	0 ~ 5VDC or 0 ~ 10VDC (max=5mA), selectable in MENU.
Optional RS-485 programming Interface
Baud rate	4800/9600/19200/38400/57600/115200
Line ending character	Cr , Lf , Cr+Lf selectable
Optional GPIB programming Interface
IEEE Std 488.2.1992
Size and Weight
Enclosure (WxHxD)	440 x 129 x 660 mm
Dimensions(WxHxD)	482 x 132 x 765.1 mm
Weight (kg)	34.8	34.8	43.6	43.6
	DSP1000-36WS	DSP1300-27WS	DSP1500-30WS	DSP1950-23WS

*1) 以上数据测试环境:恒温恒湿机内，温度0℃ ~ 50℃，湿度低于80% RH，开机30分钟后，以2% ~ 100%额定输出电压、1% ~ 100%额定输出电流，
回授补偿点为输出端子，于输出端子测得之平均数据

*2) 精确度项目于室温 23℃ ± 5℃ 测得

*3) Ripple and Noise (rms value) Measurement bandwidth up to 300 kHz

*4) Ripple and Noise (peak value) measurement bandwidth up to 20 MHz

*5) 输出电压到达定值 ±1% 所需时间 (输出电压介于额定值的10% to 90%，以电阻性负载连接，输出额定功率10%以上) (图1)

*6) 恒定负载(1 ~ 100%)，输入电压介于180 ~ 264VAC 或 342 ~ 460VAC

*7) CV:恒定输入电压，电流变化介于额定值 10% ~ 90%
CC:恒定输入电压，电压变化介于额定值 10% ~ 90%
CP:恒定输入电压，电压*电流变化介于额定值 10% ~ 90%

*8) 输出响应上升时间:电压由额定值 10% 上升至 90% 所需时间
输出响应下降时间:电压由额定值 90% 下降至 10% 所需时间 (图2)

*9) DSP-WS 系列最高输出电压为额定电压的 105%，但总输出功率不可高于额定功率的102%，此超出规格的电压以线路补偿为目的，不可视为常规使用，且规格特性不在保证范围内。

*10) DSP-WS 系列最大输出电流为额定电流的 105%，但总输出功率不可高于额定功率的102%，此超出规格的电流以线路补偿为目的，不可视为常规使用，且规格特性不在保证范围内。

*11) 电源供应器并联输出特性受线路阻抗等诸多因素影响，多台并联系统的精度参数请与本公司联系。

*12) V1 x A1 ~ V2 x A2 间数值 V 及 A 乘积小于或等于最大功率数值，为宽范围功能可能实现的全部电压和电流组合。

*13) V1可设定最大电流值为A1，A2可设定最大电压值为V2，V1 及 A2 不同时存在

*14) LXI介面反应时间： 100/1000M 网路连线，电脑直接连接至 DSP-WR，封包发送完毕后，至DA开始动作时间间隔。

*15) 倍率随机种不同略有差异。

*16) 效率随机种不同略有差异。

*17) 因本公司不断追求产品改良，故规格若有变更，恕不另行通知，网页内容仅供参考，实际规格依出货时规格书为准。

*18)擎宏电子保留迳行更动规格及其他产品资讯之权利，并拥有对规格之最终解释权力，且不承担内容之错误或疏失。

图1	图2

上一页

下一页