DSP-WR Series Programmable DC Power Supply (CV , CC , CP)
3.4kW models:
TO->
Page 1

HOME
Page 2
  DSP750-13WR DSP1500-6WR    
Output voltage
Rated value (V1) 0 ~ 750V 0 ~ 1500V    
Settable range(*9) 0 ~ 787.5V 0 ~ 1575V    
Overvoltage protection (OVP) 0% ~ 110% of rated output voltage
Voltage @Rated Current (V2)) 250V 500V    
Programming resolution 5 digits
Programming accuracy(*2) +/- 0.1% of rated voltage
Meter resolution 5 digits
Meter accuracy(*2) +/- 0.1% of rated voltage
Line regulation(*6) +/- 0.02% of rated voltage
Load regulation(*7) +/- 0.05% of rated voltage
Temperature coefficient for set values 100ppm/℃ of rated output voltage, after a 30 minutes warm-up
Ripple & noise (rms) (*3)(*4) <830mVpp
<196mVrms
 <2160mVpp
< 510mVrms
    
Full load up <30ms
Full load down <80ms
No load down <5s <5s    
Transient Response(*5) < 1.5 ms
Remote compensation
36V
72V
    
Output current
Rated value (A1) 0 ~ 13.6A 0 ~ 6.8A    
Settable range(*10) 0 ~ 14.28A 0 ~ 7.14A    
Over current protection (OCP) 0% ~ 110% of rated output current
Current @Rated Voltage (A2) 4.53A 2.26A    
Programming resolution 5 digits
Programming accuracy(*2) +/- 0.2% of rated current
Meter resolution 5 digits
Meter accuracy(*2) +/- 0.2% of rated current
Line regulation(*6) +/- 0.05% of rated current
Load regulation(*7) +/- 0.15% of rated current
Temperature coefficient for set values 100ppm/℃ of rated output voltage, after a 30 minutes warm-up
Ripple & noise(*3)(*4) (with local sense)(CC Mode) 15mA 15mA    
Output power
Rated value 0 ~ 3.4kW
Settable range(*9) 0 ~ 3468W
Over power protection (OPP) 0% ~ 110% of rated output power
Programming resolution 5 digits
Programming accuracy(*2) < 1% of rated output power
Meter resolution 5 digits
Meter accuracy(*2) +/- 0.5% of rated output power
Line regulation(*6) < 0.05% of rated output power
Load regulation(*7) < 0.75% of rated output power
Output Capacitance
Output Capacitance 50£gF 12.5£gF    
Internal resistance
Adjustment range 0 ~ 55.147£[ 0 ~ 220.58£[    
Programming resolution 0.001£[ 0.01£[    
Programming Accuracy (*2) <=2.3% of max. resistance
Insulation
Primary - Chassis 2.5 kV DC
Primary - Secondary 2.5 kV DC
Secondary - Chassis 1500VDC 2000VDC    
Operating environment Indoor use
Operating temperature
0¢J ~ 50¢J
0¢J ~ 50¢J
    
Operating humidity 30%rh ~ 80%rh (no condensation) Max 80% RH up to 30¢J, linear decrease to 50% RH at 40¢J
Storage temperature -20℃ ~ 70℃
Storage humidity 10%rh ~ 80%rh (no condensation)
Altitude Up to 2000m
Cooling method Forced air cooling using the speed controlled fan
Ground polarity Capable of Negative ground or Positive ground
Input
Nominal input rating 100V ~ 277V 50Hz/60Hz 1-phase 2 wires
Input voltage range
 85VAC ~ 305VAC 1-phase 2 wires
Input frequency range 47Hz ~ 63Hz
Current (Max.)(Input 85V/180V) 21A 21A    
Inrush current(Maximum) 40A 40A    
Input Power (Maximum) 3.75kVA 3.75kVA    
Efficiency(*15) @277Vin/3.4kW100% Vdc output
<=93.9%
<=93.8%
    
Efficiency(*15) @277Vin/3.4kW 100% Vdc output
<=92.5%
<=92.5%
    
Power Factor 0.99 typ.(AC100 ~ 277 input)
Leak current < 3.5 mA
Standard Interface
LAN interfaces 1 x LXI 1.6 for communication,
Optional Analog programming Interface
Status output (dry contact) CV State, CC State , CP State , CR State , ON/OFF State
Voltage control 0% ~ 100% of rated output voltage in the range of 0V ~ 5V or 0V ~ 10V
Voltage control accuracy(*2) +/-0.2%
Current control 0% ~ 100% of rated output current in the range of 0V ~ 5V or 0V ~ 10V
Current control accuracy(*2) +/-0.2%
Power control 0% ~ 100% of rated output current in the range of 0V ~ 5V or 0V ~ 10V
Power control accuracy(*2) +/-0.2%
Monitoring output 0 ~ 5V or 0 ~ 10V output for monitoring V/A/W
Monitoring accuracy (*2) +/-0.2%
Reference output
 0 ~ 5VDC or 0 ~ 10VDC (max=5mA), selectable in MENU.
Size and Weight
Enclosure (WxHxD) 430 x 44 x 528.2 mm
Total (WxHxD) 483.6 x 44 x 612.2 mm
Package Dimensions(WxHxD) 600 x 190 x 820 mm
Net weight (kg) 10.8 10.8    
Gross weight (kg) 15.4 15.4    
  DSP750-13WR DSP1500-6WR    

*1) The output voltage and current ranges can be set to 105% of the rated value, but the total output will be less. The extra capacity is used to compensate for external wiring loss and cannot be used as a regular value.
*2) Measured at room temperature of 23±5°C.
*3) Ripple and Noise (rms value) Measurement bandwidth up to 300 kHz
*4) Ripple and Noise (peak value) measurement bandwidth up to 20 MHz
*5) The time for the output voltage to reach ±1% of the setting value at 10% - 90% of rated voltage, and 10% and above of rated power, with a resistance load. (Fig. 1)
*6) Input voltage variation between 200~277VAC with a fixed loading 1~100%.
*7) CV Mode: Constant line voltage; output current variation between 10% - 90% of the rated value.
CC Mode: Constant line voltage; output voltage variation between 10% - 90% of the rated value.
CP Mode: Constant line voltage; output voltage*current variation between 10% - 90% of the rated value.
*8) All data were measured at the output terminal with local sensing, at 2% - 100% of rated voltage, 1% - 100% of rated current, after 30 minutes warm-up, in a room at 50°C and 80% RH.
*9) "Rise Time" means the time from 10% to 90% of rated voltage; "Fall Time" is the time to drop from 90% to 10% of rated voltage.
*10) The performance will be affected the character of the external wiring for multi-unit paralleling.
*11) LXI interface with minimum 3ms response time. The actual response time will be affected by your network's connection quality and LAN speed.
*12) The information in this document is subject to change without notice and should not be construed as a commitment by iDRC. iDRC assumes no responsibility for any errors that may appear in this document. In no event shall iDRC be liable for incidental or consequential damages arising from use of this document or the software or hardware described in this document.

Fig1
Fig2

 

 

Previous

Next

Copyright 2026 CHYNG HONG ELECTRONIC CO., LTD.  |  Contact us